Shopping
2 results for
Televes
Amplifiers
|
Product ID: TV-451280
Supplier: Televes
Description: Professional quality, completely self contained, two way broadband indoor distribution amplifiers designed for multi-channel RF distribution systems where the input source is a cable drop or the output of a MATV/SMATV/CATV headend. Model TV-451280 is a high output level, power doubling amplifier, with an RF bandwidth of 1002MHz, equipped for 2-way operation with a 42/54MHz split that can operate in passive or active return configurations. These amplifiers have a user selectable gain of either 30dB or 40dB and 20dB attenuator slope control with 10dB regulator tilt control. The return gain is 28dB when in active mode The gain and slope controls are located on the front panel for easy setup and adjustment with the provided tool. Two -20dB test points are provided to permit testing without interruption of service. The DTKom Series amplifiers incorporate a built in switched 120/230V power supply and are characterized by their exceptionally low power consumption for a long and trouble-free operating life. The cast Zamak chassis has been optimized to be compact and easy to install, while at the same time providing excellent heat dissipation, allowing operation at high ambient temperatures with no degradation of performance or reliability.
Description: Professional quality, completely self contained, two way broadband indoor distribution amplifiers designed for multi-channel RF distribution systems where the input source is a cable drop or the output of a MATV/SMATV/CATV headend. Model TV-451280 is a high output level, power doubling amplifier, with an RF bandwidth of 1002MHz, equipped for 2-way operation with a 42/54MHz split that can operate in passive or active return configurations. These amplifiers have a user selectable gain of either 30dB or 40dB and 20dB attenuator slope control with 10dB regulator tilt control. The return gain is 28dB when in active mode The gain and slope controls are located on the front panel for easy setup and adjustment with the provided tool. Two -20dB test points are provided to permit testing without interruption of service. The DTKom Series amplifiers incorporate a built in switched 120/230V power supply and are characterized by their exceptionally low power consumption for a long and trouble-free operating life. The cast Zamak chassis has been optimized to be compact and easy to install, while at the same time providing excellent heat dissipation, allowing operation at high ambient temperatures with no degradation of performance or reliability.
Spec Sheet
Login For Prices
|
Product ID: TV-531981
Supplier: Televes
Description: SmartKom Off-Air Antenna Amplifier PROCESSES UP TO 3 SEPARATE VHF OR UHF OFF-AIR ANTENNAS, AUTO OR MANUAL PROGRAMMING VIA BLUETOOTH, (54-88 / 174-216 / 470-608)MHZ Compact and intelligent amplifier with digital channel processing, designed for installation outdoors or indoors in family houses. Equipped with (3) inputs to amplify terrestrial signals (VHF+UHF) in which each channel can be individually filtered by any of the (32) available programmable filters. SmartKom is supplied with a 12V (750mA) domestic power supply that is inserted into the coaxial installation and powers it through its output connector. The auto-programming function of the amplifier gives this device the ability to program and adjust by itself, simply by pressing a button. In addition, thanks to the Bluetooth antenna included in the PSU, manual programming of the amplifier can be done wirelessly using a smartphone or tablet, with the ASuite application.
Description: SmartKom Off-Air Antenna Amplifier PROCESSES UP TO 3 SEPARATE VHF OR UHF OFF-AIR ANTENNAS, AUTO OR MANUAL PROGRAMMING VIA BLUETOOTH, (54-88 / 174-216 / 470-608)MHZ Compact and intelligent amplifier with digital channel processing, designed for installation outdoors or indoors in family houses. Equipped with (3) inputs to amplify terrestrial signals (VHF+UHF) in which each channel can be individually filtered by any of the (32) available programmable filters. SmartKom is supplied with a 12V (750mA) domestic power supply that is inserted into the coaxial installation and powers it through its output connector. The auto-programming function of the amplifier gives this device the ability to program and adjust by itself, simply by pressing a button. In addition, thanks to the Bluetooth antenna included in the PSU, manual programming of the amplifier can be done wirelessly using a smartphone or tablet, with the ASuite application.
- Automatic gain regulation of signal in each filter (AGC)
- Plug&Play: the amplifier automatically programs and adjusts the channel level by pressing the auto programming button.
- Indoor power supply included, with a Bluetooth antenna for wireless manual programming of the amplifier
Spec Sheet
Instruction Manual
Login For Prices